Redlion DA30D Data Logger

Redlion DA30D Data Logger

Usage/Application
Router
Model Name/Number
DA30D
Number Of Ports/Pins
5 Ports
Power
7 W
Dimension
127.7 x 31.3 x 101.4 mm
Input Voltage
24 V DC
Brand
Red Lion
Memory
512MB,SD Card Up to 16GB
Operating Temperature
-10 to +50 Degree C
IP Rating
IP40
Powerful Connectivity Tools Unlock Valuable Data from Orphaned and Legacy Equipment York, Pa. November 12, 2018 Red Lion Controls, global experts in communication, monitoring and control for industrial automation and networking, announced the release of the DA30D Protocol Conversion and Data Acquisition devices today. Unlike other gateways or protocol converters that rely on complicated scripting or additional server hardware to connect to enterprise systems, the DA30D offer powerful connectivity options in a simple-to-use configuration environment, enabling companies to quickly unlock valuable data in orphaned or legacy equipment and cost-effectively connect, monitor and manage their systems with ease. For factory automation customers who need to collect critical data from multi-generational or multi-vendor deployed systems, the DA30D Data Acquisition protocol converters are new devices that offer standard Ethernet and serial ports to gather and share data from disparate systems. This new offering leverages Crimson 3.1 software, providing native support to over 300 industrial drivers, out-of-box OPC UA server capabilities and simple point-and-click configuration of MQTT cloud connectors for some of the industry's most popular IIoT platforms from Amazon, Microsoft and Inductive Automation. From the plant floor to the front office, the DA30D Protocol Converter and Data Acquisition platforms were designed to act as a key part of any plant's industrial data collection, visualization and management system, allowing for operational decisions that have meaningful business impact. Providing real-time data from virtually any equipment, anywhere, additional options include a data, event and security logger with cryptographic signature support and SQL queries which can be executed periodically or on demand, ideal for both simplifying recipe and batch management while ensuring the highest quality standards. Further, the platform also offers an optional web server featuring mobile responsive design, a full-screen display ideal for tablet or mobile display, HTTPS operation with the provision of certificates, HTTP redirect, CSS and JavaScript support. Industry-leading protocol conversion
  • Communicate with over 300 protocols
  • Easily convert between serial, USB and Ethernet devices
  • Manage multi-vendor environments with ease
Connectivity
  • 1 10/100 Ethernet port
  • 2 RS-232 serial ports
  • 1 RS-485 serial port
  • 1 USB host port
  • 1 USB device port for upload/download
  • Expansion port for select add-on network modules
Other Features
  • 10-30 VDC operation
  • SD card slot for data logging and database upload/download
  • Configured using Crimson 3.1 software
  • -10 to 50 C
  • 30 g Shock
  • 2 g Vibration

Data Sheets

HS9000-03
Read more
HS 900 Gas Sensor

HS 900 Gas Sensor

Gas Sensors Gas Sensor adopts high-precision chip for data acquisition , advanced technology of manufacturing technique and surface  mount , which to ensure accurate and  reliable  measurement data . It has outstanding characteristics in measurement accuracy, linearity, repeatability, interoperability, consistency and other aspects . It is suitable for environmental equipment matching ，integration , and most of the general environmental tests . HS 900 with complete monitoring parameters and accurate data . The parameters can be customized according to the requirements , up to 5-6 parameters , including air  temperature ,  air  humidity,  CO2  concentration ,  CO  concentration ,  PM1 .0/2 .5/10.0 ,  atmospheric pressure , formaldehyde , oxygen , ozone , volatile organic compounds , etc .
 
Read more
ALL IN ONE Standard

ALL IN ONE Standard

Up to Six Parameters from a Single Sensor Body These sensors integrate a unique folded-path sonic anemometer with a multi-element temperature sensor, a fast-response capacitive relative humidity sensor, and a state-of-the-art barometric pressure sensor. Alternative configurations are available, equipped with either a photodiode radiation sensor or an optical rain sensor. The outcome is a professional-grade All-In-One Weather Sensor engineered for reliability, extended lifespan, and straightforward installation.
 
Read more
Asphalt state temperature, aqueous film, freezing and residual salt

Asphalt state temperature, aqueous film, freezing and residual salt

Extensive Range of Sensors for Continuous Asphalt Surface Condition Monitoring These sensors are designed for comprehensive monitoring of asphalt conditions. They are engineered for use in demanding environments that experience snow and ice treatment interventions. Asphalt condition sensors.
 
Read more
Temperature and water content

Temperature and water content

Designed and manufactured for continuous measurements in extremely severe situations A diverse selection of sensors is available for monitoring compost heaps throughout the bio-oxidation process. These sensors are exceptionally durable, having been specifically designed for continuous operation within corrosive materials.
 
Read more
Two level temperature

Two level temperature

Engineered for Continuous Measurements in Extremely Harsh Conditions A wide range of sensors is available for monitoring compost heaps throughout the bio-oxidation process. These sensors are exceptionally robust and have been specifically designed for continuous use in corrosive materials.
 
Read more
Soil thermal profile sensor

Soil thermal profile sensor

Sensor for Soil Temperature Profile Measurement The PRMPA1204 is specifically designed to measure the soil temperature profile from the surface down to a depth of 1 meter. This sensor provides the temperature curve across 7 distinct measuring points. It comprises a fiberglass tube and a robust waterproof stainless steel tip. Models : PRMPA1204 Cable Length = 5 m Code: PRMPA1204
Read more
Soil temperature sensor

Soil temperature sensor

Sensors for Measuring Temperature and Volumetric Water Content This series features sensors engineered for measurements within soils or other porous materials. Also available is a sensor specifically for gauging surface or depth temperature. Models: Pt100 ½ DIN B - DLE041A Cable Length = 10 m Code: DLE041A
Read more
Wet Bulb Temperature

Wet Bulb Temperature

Wet bulb natural ventilated temperature sensor.
 
Read more
ISTSA – Heat Stress Automatic Stations

ISTSA – Heat Stress Automatic Stations

Stations for Human Heat Stress Assessment LSI LASTEM’s ISTSA thermal stress monitoring stations are engineered to quantify and evaluate the degree of thermal stress in challenging environmental conditions. Their primary objective is to safeguard the health and safety of individuals working in extreme temperatures. By employing high-precision sensors, these stations facilitate real-time detection of microclimate conditions and compute crucial indices like WBGT and UTCI, precisely as defined by ISO standards.
Read more
ISMMA – Weather Stations

ISMMA – Weather Stations

ISMMA Weather Station Kits LSI LASTEM’s ISMMA weather stations present the perfect solution for climate monitoring across both environmental and industrial contexts. These comprehensive kits incorporate high-precision sensors that adhere to international WMO (World Meteorological Organization) standards. Furthermore, their design prioritizes extremely low power consumption, guaranteeing peak performance in all weather conditions.
 
Read more
KME Professional weather stations

KME Professional weather stations

Automatic Weather Station KME weather stations represent professional solutions for acquiring standard weather parameters, including air temperature and relative humidity, wind speed and direction, atmospheric pressure, solar radiation, and rainfall. Each station is comprised of a fundamental kit that encompasses a curated selection of sensors, a 12-input data logger, and accompanying software.
 
Read more
Sphensor

Sphensor

Sphensor: Unmatched Accuracy and Innovative Design Sphensor introduces a new generation of multi-parameter radio (2.4 GHz) sensors, specifically engineered for real-time, long-term monitoring of all critical Indoor Environmental Quality (IEQ) parameters. With SphensorTM, users can concurrently measure thermo-hygrometric data like temperature and relative humidity, environmental parameters such as atmospheric pressure, illumination across 5 distinct orientations, UV-A radiation, and air quality, encompassing VOC, CO2, and PM (1, 2.5, 4, 10) concentrations.
 
Read more
Air Speed

Air Speed

Hot Wire Anemometer This is a portable hot wire anemometer designed for measuring average air speed (va). Models ESV108-309 exclusively measure air speed, taking one sample every 100 ms and updating their output every second. The ESV307 model operates similarly to the ESV108 but features a serial output, allowing for direct connection to the RS232-2 port on E/M-Log data loggers.
 
Read more
Globe temperature

Globe temperature

Black Globe Temperature Sensor This radiant temperature sensor (with Pt100 output) provides a crucial variable for microclimatic index computations. The temperature registered by the black globe environmental sensor signifies the combined effects of thermal radiation (radiant heat), ambient air temperature, and air velocity on human thermal comfort.
 
Read more
Thermohygrometer

Thermohygrometer

Direct output sensor for ambient air temperature and relative humidity measurements.
 
Read more
Compact 3-cup anemometer

Compact 3-cup anemometer

Sensors designed for measurement in any environmental condition High mechanical resistance sensors. A broad selection of wind speed sensors is available, featuring both moving and ultrasonic components, designed for operation even in extreme conditions. These sensors are suitable for connection with LSI LASTEM data loggers or for integration into third-party systems.
 
Read more
Wind direction – Standard type

Wind direction – Standard type

Sensors designed for measurement in any environmental condition Wind direction sensors with analogue output. A diverse selection of wind direction sensors is offered, featuring both moving and ultrasonic components, and capable of operating even in extreme conditions. These sensors are suitable for connection with LSI Lastem data loggers or for integration into third-party systems.
Read more
Direct signal output

Direct signal output

Thermohygrometers for any type of environmental application A diverse selection of precise and dependable sensors engineered for uninterrupted meteorological measurements, even in harsh climatic conditions and amidst significant thermal and hygrometric fluctuations. These utilize the RTD Pt100 1/3 DIN B (Class AA EN60751) principle for temperature measurement and capacitive technology for humidity. This thermohygrometer is specifically engineered for environments experiencing pronounced thermal and hygrometric variations.
Read more
Sunshine duration

Sunshine duration

Rotation band sunshine duration sensor The sensor measures sunshine duration and direct radiation from the sun. Measurement is made in the visible range and near infrared, to second class WMO pyranometer specifications.
Read more
Portable wireless WBGT meter – Heat Shield

Portable wireless WBGT meter – Heat Shield

Compact solution for measuring the main comfort and thermal stress indices Heat Shield meter displays on-line WBGT index (without or with solar load), WBGT Eff and Delta to the WBGT Ref, plus Heat Index and Humidex indices. Furthermore, if ESV125A anemometer is connected, Heat Shield can calculate directly the PMV-PPD comfort index (ISO7730).
Read more
G.Re.T.A

G.Re.T.A

Permanent geoelectrical monitoring G.Re.T.A. (GeoRestivimeter for Time lapse Analysis) is the most effective and innovative solution for Permanent Geoelectrical Monitoring of the conditions of large sections of soil.
Read more
Redlion DA30D

Redlion DA30D

Usage/Application
Router
Model Name/Number
DA30D
Number Of Ports/Pins
5 Ports
Power
7 W
Dimension
127.7 x 31.3 x 101.4 mm
Input Voltage
24 V DC
Brand
Red Lion
Memory
512MB,SD Card Up to 16GB
Operating Temperature
-10 to +50 Degree C
IP Rating
IP40
Powerful Connectivity Tools Unlock Valuable Data from Orphaned and Legacy Equipment York, Pa. November 12, 2018 Red Lion Controls, global experts in communication, monitoring and control for industrial automation and networking, announced the release of the DA30D Protocol Conversion and Data Acquisition devices today. Unlike other gateways or protocol converters that rely on complicated scripting or additional server hardware to connect to enterprise systems, the DA30D offer powerful connectivity options in a simple-to-use configuration environment, enabling companies to quickly unlock valuable data in orphaned or legacy equipment and cost-effectively connect, monitor and manage their systems with ease. For factory automation customers who need to collect critical data from multi-generational or multi-vendor deployed systems, the DA30D Data Acquisition protocol converters are new devices that offer standard Ethernet and serial ports to gather and share data from disparate systems. This new offering leverages Crimson 3.1 software, providing native support to over 300 industrial drivers, out-of-box OPC UA server capabilities and simple point-and-click configuration of MQTT cloud connectors for some of the industry's most popular IIoT platforms from Amazon, Microsoft and Inductive Automation. From the plant floor to the front office, the DA30D Protocol Converter and Data Acquisition platforms were designed to act as a key part of any plant's industrial data collection, visualization and management system, allowing for operational decisions that have meaningful business impact. Providing real-time data from virtually any equipment, anywhere, additional options include a data, event and security logger with cryptographic signature support and SQL queries which can be executed periodically or on demand, ideal for both simplifying recipe and batch management while ensuring the highest quality standards. Further, the platform also offers an optional web server featuring mobile responsive design, a full-screen display ideal for tablet or mobile display, HTTPS operation with the provision of certificates, HTTP redirect, CSS and JavaScript support. Industry-leading protocol conversion
  • Communicate with over 300 protocols
  • Easily convert between serial, USB and Ethernet devices
  • Manage multi-vendor environments with ease
Connectivity
  • 1 10/100 Ethernet port
  • 2 RS-232 serial ports
  • 1 RS-485 serial port
  • 1 USB host port
  • 1 USB device port for upload/download
  • Expansion port for select add-on network modules
Other Features
  • 10-30 VDC operation
  • SD card slot for data logging and database upload/download
  • Configured using Crimson 3.1 software
  • -10 to 50 C
  • 30 g Shock
  • 2 g Vibration
Read more
Air temperature

Air temperature

Sensors for any type of environmental application.

Read more
Portable poles

Portable poles

Portable telescopic pole and tripod

Ideal solutions for short- and medium-term monitoring campaign using portable equipment.

Read more
Psychrometer sensor

Psychrometer sensor

Dry bulb and wet bulb temperature sensor

A psychrometer sensor featuring wet and dry bulbs and forced ventilation. The wet bulb is enclosed within a wet cotton sock, supplied from a distilled water tank.

 

Read more
Gas

Gas

Gas sensors to measure the most common gas (indoor air quality) in indoor applications.

Read more
Direct Radiation (DNI)

Direct Radiation (DNI)

Pyrheliometer

Research grade normal incidence direct solar irradiance sensor (DNI), also known as pyrheliometer for short wave direct solar radiation. It complies with ‘First Class’ classification, from ISO9060 and WMO standards.
A unique product feature is the heated window, eliminating the formation of dew on the sensor window, making early morning measurements more accurate.
DPA259 is the first pyrheliometer to include a fast detector, making it ideal for high grade research or CPV applications..

Code: DPA259

Highlights

  • Pyrheliometer instrument for measurement of direct beam solar irradiance so called “Direct radiation”
  • “First Class” classification according to ISO9060
  • Integrated anti-condensation heated optic
  • Fast response time
  • Mountable on solar trackers
  • μV output, RS485-RTU and 4…20 mA output using external modules
Read more
X-Panel

X-Panel

Real-time data visualization dashboard

The X-Panel module is a control panel that displays in real time and dynamically the instantaneous values coming from the data loggers of the M / R / E-Log, Pluvi-ONE and Alpha-Log series.

The software receives the data from M / R / E-Log connected via cable or through the CommNET program. The use of the latter program allows you to use multiple independent X-Panel sessions on multiple computers on the same network.

For A-Log and Pluvi-ONE, the X-Panel takes data from an MQTT broker server where the data logger has sent the data.

With X-Panel the configuration of each page is fully customizable according to the data loggers and sensors to be displayed.

Highlights

  • Real-time information on dynamic control panel from connected data loggers;
  • Complete programmability;
  • Multi-parameter and multi-station control panel;
  • Data input directly from the data loggers or from the CommNET program or from MQTT server.
Read more
Gidas Viewer

Gidas Viewer

Management, reporting and analysis of data downloaded to the PC

GIDAS Viewer is the program for viewing historical data downloaded from data loggers (through 3DOM, CommNET and P1-CommNET).

The program uses the data in the SQL GIDAS database and produces tables and graphs, both of raw data and of reprocessed data, according to different time bases that can be selected by the user. The re-elaborations can be exported as Excel files ( CSV) or text files ( TXT), the graphs can be saved as images (* JPG). The program allows you to save data view filters (Views), with the possibility of including data from more than one station at the same time, using the same settings without having to re-edit them. The display can include one or more quantities acquired by one or more devices in order to aggregate data from different data loggers.

Highlights

  • Visualization and extraction of stored data from the GIDAS database;
  • Data re-processing on different time bases;
  • Creation of charts and tables;
  • Creation of the wind rose;
  • Includes Lite version for quick analysis;
  • Setting up queries to manage views of selected data.

Data selection

GIDAS Viewer allows you to select:

  • The data logger of interest;
  • The measured variables;
  • The measurement period (time window) or the latest data available;
  • The processing basis (none, 1h, 6h, 1d, 1sett, customizable).

Data display

  • Multi-size and multi-station tables and graphs. Useful graphic functions (zoom, scroll);
  • Data export in text files and Excel files;
  • Export of graphics as images;
  • Calculation and visualization of the Rose of the Winds;
  • Calculation and visualization of the Weibull curve to support applications in the field of wind energy.

GIDAS Lite module

GIDAS-Lite is also supplied together with GIDAS Viewer, a module that allows the use of some features of the main program, in a simple and fast way. It includes two sections:

  • Data download to be imported into the GIDAS database (if the data logger is connected via RS232-RS485-USB-Ethernet) without the use of 3DOM or CommNET;
  • Selection of data for their simplified visualization.
Read more
3DOM

3DOM

For configuration and manual data download

Supplied with each data logger, it allows configuration via PC, with the possibility of saving the various configurations locally.
Supplied with all data loggers, the program guides the user through the procedure, with the possibility of creating a final report. It allows both a quick and easy display of the instantaneous values acquired, useful for diagnostic purposes, and the download of data from the memory in .TXT format compatible with Excel.

Code: 3DOM

Highlights

Data logger configuration

Choice of our company sensors from library, or parameterization that of other sensors
Configuration of the measured and calculated quantities selected from the library of derived quantities that use measured or in turn calculated quantities and settable K-factors (see Catalog of Derived Quantities)
Electrical signals engineering (analog, digital, serial) in each channel
Choice of the protocol of the connected serial sensor
Configuration of the channel register for Modbus protocol
Choice of network and channels for ZigBee protocol (only R-Log and E-Log model with radio)
Acquisition rate configuration for each channel
Choice of processed values: instantaneous, average, maximum, minimum, standard deviation, total, wind output, etc.
Choice of the statistical basis for processing
Configuration of calibration polynomial curves (maximum 7 configurable curves)
Configuration of electrical outputs (actuators) according to programmable events
Choice and sending of the configuration (also via GPRS)
Data transfer to PC via RS232-RS485-USB-Ethernet-GSM

The transfer of stored data to the PC is performed manually (on operator command) with a cable (RS232-USB / 485) or via Ethernet.

It is possible to set the date from which the data must be downloaded and visualize them (data preview) before downloading. Configuration of the two RS232 ports convertible to RS485 or USB

GPRS modem configuration
FTP connection configuration for data transmission (push-mode) via Ethernet (Pluvi-ONE and Alpha-Log) or GPRS modem
Data transmission protocol configuration: proprietary protocol, Modbus-RTU (Master), TTY and FTP

From the program it is possible to select which storage medium to save the data on. Choice of format: TXT file or SQL Server GIDAS database.

Configuration of the text file format.
Allows the configuration of the Pluvi-ONE and Alpha-Log data loggers. Through 3DOM it is also possible to download the data sent by the instruments to a remote FTP area and save them in SQL GIDAS format on the local PC. The configuration file can be sent to Pluvi-ONE and Alpha-Log in the following ways: Via Ethernet port Via a USB key Via FTP server in which Pluvi-ONE and Alpha-Log check if there is a new configuration available and, if positive, upload

Read more
CommNET

CommNET

For automatic data download on PC

This module allows you to automatically configure, download and save the data present in a data logger in the SQL GIDAS database that resides on a PC (or on a Windows Server) or in a text file. CommNet can simultaneously manage different types of communication and protocols, including serial COM, PSTN, GSM and GPRS, TCP / IP, VHF / UHF radio.

The program consists of two modules, one for configuration and one for automatic data download. CommNET can be installed on a server, the generated SQL database and the programs that use it can reside on other PCs connected to each other.

Code: BSZ306.2

Highlights

  • Automatic communication of data via GSM, GPRS, radio, TCP / IP from the data logger to the PC;
  • Instant or processed values storage on GIDAS database or text format with formatting;
  • Monitoring of communications service activities and generation of a log file.

Configuration form

  • Simultaneous use of different communication devices: VHF / UHF radio, GSM, GPRS, LAN / WAN, USB, RS232 / 485 cable);
  • Automatic call mode of one or groups of data loggers: communication device, start date / time and repetitions;
  • Configuration of the stored data format: customizable text file, SQL database, GIDAS server, binary file;
  • Data type configuration: processed and / or instantaneous. The instantaneous values are used by X-panel and other programs created by the user;
  • Automatic synchronization of data logger clocks;
  • Switching off the communication devices of the data logger after the call;
    Memorization of the configurations made.

Service activity

  • Automatic restart in case of restart of the PC;
  • Panel for displaying calls in progress, pending and communications statistics;
  • Communications log;
  • Manual calls.

GPRS module

Incoming calls in “push mode” from data loggers via GPRS modem. In this case the PC that receives the incoming data must have a public and static IP.

Server installation

CommNET can be installed on a server where it stores data on the SQL GIDAS database. The database can be queried by the programs installed on other PCs on the network that support this database.

Read more
LSI-WEB

LSI-WEB

All the features available from any workstation connected to the web

Cloud based platform that allows access to data logger data from any internet location.

The application requires the data logger to be equipped with a GPRS modem or connected via TCP/IP.

The website is modular and available with the introduction of login credentials.
It is available in Italian, English and French. Optional modules can be added for specialist application calculations.

Code: DZZDAT.2

Highlights

  • Last values display;
  • Last 72 hours values in a dash-board in graphic format and dynamic update;
  • Historic data nalysis from data base in tables and charts;
  • On map data display of measurements arriving from different dala loggers;
  • Data export in text and Excel formats;
  • Email for missing data or wrong measurements;
  • Storage of the maintenance reports;
  • Modules for additional functions.
Read more
Alpha-Log CommNET

Alpha-Log CommNET

Alpha-Log CommNET

For automatic data download on FTP area

Service application that allows you to download data automatically from the FTP servers where the data logger Alpha-Log sent them. Once received, it is possible to manage the data for different purposes:

  • Use the data with programs that support the SQL-GIDAS database;
  • Use the data present in the SQL database in a flexible and immediate way through third-party applications created for the purpose;
  • Back up ASCII data from an FTP area to local or shared folders.

Code: BSZ309

Data download from remote FTP area

Both data loggers can send data to several FTP areas. The tools connect itself automatically and periodically to each FTP area and download the data from there. Then the tool saves the data into SQL GIDAS data base in the receiver server for further management.

Moving file into the server

After data download the tool can move the file to a backup folder of the FTP area.

Highlights

  • Saving of Alpha-Log adata on SQL-GIDAS database for use
  • Once present in the database, the data are easily managed through GIDAS-Viewer;
  • Saving data on SQL database on local or shared folder (visible in local or remote network).
Read more
G.Re.T.A. Cloud

G.Re.T.A. Cloud

The data of the georesistivimeter always available

Web-based cloud platform that allows access to the data of the G.Re.T.A. from any Internet location.

This service is offered by subscription

The website is available with the introduction of login credentials. It is available in Italian, English, French and Spanish.

Code: SWCLA1022

Highlights

  • Visualization of resistivity data
  • Visualization of acquisition parameters
  • Comparison between data of different days
  • Measurement of contact resistance between electrodes
  • Inversion algorithm included in the cloud software
  • Possibility of inserting a calibration function to convert resistivity sections into sections of soil water content
  • Ability to set alarm thresholds
  • Acquisition configuration section
  • Data export in text or jSON format

Geolocation of the stations

Display on a cartographic basis of the position of the G.Re.T.A. stations with name and first level of diagnostics on operation. G.Re.T.A. system communication to the server via Modem / Router. Geolocation of stations on the map: the coloured dot indicates a first diagnostic on the correct functioning of the system.

Display of resistivity data and acquisition parameters

Display of apparent and inverted resistivity data. Display of the acquisition parameters, such as injected current, measured voltage, standard deviation of the measurements and soil water content.

Data comparison

Possibility of comparing data acquired at different times, selectable from the list of measurements performed.

Introduction of the resistivity-water content calibration function

The user can enter the calibration parameters of a specific site function for the transformation of resistivity sections into sections of soil water content. To obtain parameters A and B of the function, it is necessary to perform a core drilling with ex-traction of samples at different depths on which to measure the water content of the soil.

Measurement configuration

The user configures the execution of the G.Re.T.A. system measurements indicating the type of survey:

  •  apparent resistivity measurement
  • measurement of contact resistances

And choosing the time frequency of the measurement. The system updates automatically, recognizing the presence of a new configuration file on the cloud.

Alarm module

The user can set alarms to be activated when the resistivity data variation thresholds are exceeded. It is possible to choose the area of the section on which apply the alarm, the temporal distance on which evaluate the command and the % change in resistivity to be achieved. For each system it is possible to set different alarms with different thresholds, ap-plied to different areas of the section or acting on different time periods. The user is notified that the threshold has been exceeded via an email.

Read more
HSM (Heat Shield Manager)

HSM (Heat Shield Manager)

For the management and processing of data for indoor and outdoor WBGT calculation

Heat Shield Manager is a program for assessing the risk of thermal stress in the workplace by calculating indoor and outdoor WBGT indices, according to the updated ISO7243: 2017 standard.

The program is combined with the Heat Shield instrument, from which it downloads the data, analyzes them and produces tables, graphs and reports, managing the data according to the configuration set on the instrument.

Code: BSZ125

Highlights

  • Download and manage the measurements performed by Heat Shield;
  • Data display and statistical recalculation of measurements;
  • Limits analysis by types of subjects;
  • Report creation;
  • The program follows the ISO7243 standard updated to 2017.
Read more
GIDAS Penman

GIDAS Penman

Calculation module of the evapotranspiration index according to FAO Penman-Monteith

Module to calculate the evapotranspiration index according to the FAO Penman-Monteith equation (“Crop evapotranspiration – Giudelines for computing crop water requirements FAO Irrigation and drainage paper 56, FAO – Food and Agricolture Organization of the United nations Roma, 1998”). Evapotranspiration is the water loss of soil and plants that turns into vapor. GIDAS-Penman software allows to calculate the daily and monthly evapotranspiration index ET0, that is the evapotranspiration rate from a benchmark surface. It gets the data from the SQL server GIDAS data base.

Highlights

  • Calculation of Evapotranspiration according to FAO Penman-Monteith equation;
  • Daily and monthly calculation;
  • Results report;
  • The calculation of the daily Evapotranspiration is also available on board the Alpha-Log data logger.

Parameter configuration

  • Configuration of one or more sites;
  • Selection of necessary parameters: temperature, humidity, net solar radiation and wind speed;
  • Use of measured or simulated values;
  • Calculation on a daily or monthly basis.

Results

  • Calculation of the daily or monthly ET0 evapotranspiration index;
  • Display of results in table and graph format;
  • Creation of reports in Open Office XML format (ECMA-376), also compatible with Microsoft Office.
Read more
InfoFLUX

InfoFLUX

Module for calculating the thermal conductance and the transmittance value

InfoFLUX, developed by ANIT (Italian National Association for Thermal and Acoustic Insulation), allows the calculation of the thermal conductance, from which the thermal transmittance value U is derived. This is a physical quantity that is used to calculate the thermal losses through a surface (e.g. an external wall). The lower its value, the lower the thermal losses will be.

For each measurement point, the InfoFLUX program performs thermal conductance calculations using two methods: “method of flowing averages” (ISO 9869: 1994) and “black box method” which processes the values with a statistical method, this method allows to obtain the result in a shorter time than the “sliding averages” method.

The program needs as input an ASCII file containing the values of:

  • N.2 Temperature in contact with the external wall
  • N.1 Temperature in contact with the internal wall
  • N.1 Thermal flow through the wall

Code: BSZ310

Highlights

  • Import of the data file containing measurements (n. 3 surface temperatures and n. 1 thermal flux);
  • Displays useful charts to determine the time when result is stable and rapresentative;
  • Creates reports (in .xls, .docx or html format) with user’s information, tables and charts.
Read more
TEA (Thermal Environments App)

TEA (Thermal Environments App)

Modules for the calculation of microclimatic indices: “moderate”, “hot” and “cold” environments

The GIDAS-TEA program calculates the microclimatic indices (hot and cold stress and thermal comfort) most used and recognized by international standards. The program is divided into three modules:

Module for moderate environments (thermal comfort) Calculation of thermal comfort indices to evaluate the distance between the current situation and the theoretically optimal one:

  • PMV Expected average rating (ISO7730)
  • PPD% dissatisfied (ISO7730)
  • DR% dissatisfied with air currents (ISO7730)
  • TO Operating temperature
  • Module for cold environments (thermal-cold stress) Calculation of cold thermal stress indices, useful where there is a significant intervention of the body’s thermoregulation system in order to limit the potential excessive decrease in body temperature:
  • IREQ Thermal insulation required (ISO11079)
  • IclReq Thermal insulation required by clothing (ISO11079)
  • Dlim Maximum duration of exposure and Drec recovery time (ISO11079)
    TWC WindChill temperature
  • Module for hot environments (thermal-hot stress) Calculation of hot thermal stress indices, useful where there may be a risk of heat stroke and dehydration due to high temperatures:
  • WBGT Internal / External (ISO7243: 2018)
  • PHS Predictable thermal stress (ISO7933: 2004)

In case you need to calculate the three types of indices, you can opt for the complete software (BSZ318).

Highlights

  • Database of environments, subjects and analyzes performed;
  • Measurement tables and graphs;
  • Configurable analysis report;
  • Simulation and calculator functions;
  • Lite functionality included for fast single-point analysis.

Module for data logger configuration and data download

GIDAS-TEA includes a module that sends the most appropriate configuration to the data logger according to the probes availability to carry out microclimat surveys. It also includes a specific module for data download without the use of 3DOM.

Managing surveys, stations and measured items

  • Data logger devices can record measurements as surveys. each survey is identifiied by a number and its data/time of start/end of the merasurements. GIDAS-TEA records survey and allows separate microclimate analysis
  • Setup and storing of the position where surveys have been carried out, including description as site, building, environment, measurement position
  • Subjects setup: clothing (Clo), metabolic rate (Met) and Efficiency (%). These information are obtained from recorded tables from relevant ISO standards.

Survey analysis per position

Once a position is configured, it is possible to match the relevant surveys and carry out the microclimate indices analysis for each related subject. GIDAS-TEA tracks all the results obtained in the same position over the time. This is useful to monitor dynamic changes over the time, depending by the microclimate conditions and the different analyzed subjects.

Report of data

  • It can formulate charts and tables using environmental measurements and indices calculated for each subject in each position
  • It automatically produces a final report with information about position of measurement, free texts, tables and charts. This report can be saved as docx or open office xml (ECMA-376).

PHS index (Hor environments module)

The PHS index (predicted heat Strain) described in the ISO7933:2004 standard, allows to verify the working and resting environments and supply working and resting cycles to the worker to avoid heat stress situations according to the limits.

Calculator

  • Simulation feature: it is possible to replace one more measures environmental quantities (e.g. air temperature) with a fixed value and allows to estimate the microclimate indices. This also helps to choose which sensor/measure to be used for a specific calculation, in case of equal quantities coming from different sensors (common situation in multi-measurement nteworks).
  • Calclulator: it is possible to set specific estimated values for all the input values of the microclimate calculations, and to provide results of indices in those dynamic conditions. It is possible to change aech specific value to check how the index values could change in different conditions. Results can be exported as ASCII or Excel files.

GIDAS-TEA Lite

Module to carry out calculation of microclimate indices over a single survey and single subject, without the setup of the position where it was carried out.

  • Data download from the connected data logger
  • Data displays in easy and fast way
  • Direct calculation of microclimate indices: selection of the survey, setup of the subject parameters and correspondent result achievement
Read more
GIDAS-ADM

GIDAS-ADM

Model for the calculation of odor dispersion with atmospheric diffusion models

Calculation and result display of odor concentration over a specific area. This parameter can be expressed as odor units or as a percentage compared to the maximum value recorded. It allows to carry out a pre-analisys of the odor concentration by using a simplified version of the Gaussian model, WindImula, which is developed by Maind Srl and ENEA (National Agency for New Technologies, Energy and Sustainable Economic Development) and raccomanded by ARPA Agency. Results cannot be used according to the relevant international regulationss.

Code: BSZ422

Highlights

  • Calculation of the dispersion of odor concentrations;
  • Setting the source and emission;
  • Display of real-time results on the map;
  • Calculation and display of the stability class of the atmosphere;
  • Report creation.

Results

  • Graphic view of results on a map and numeric view on a tabular report;
  • Automatic calculation of concentration on an hourly basis and calculation of mean value over the selected period;
  • Calculation of odor concentration expressed as odor units, which are configured according to the peack to mean ratio, or expressed as a percentage comared to the maximum value recorded in the specific area;
  • Calculation and view of the atmospheric stability class;
  • View of real time temperature, wind speed and wind direction;
  • Copy-paste function of the map with the obtained results;
  • Report in html format with customizable logo.

Configuration of parameters

  • Use of meteorological data as recorded in the GIDAS data base;
  • Selection of quantities required for the calculation: temeprature, wind speed, wind direction, standard deviation of direction or net and global radiation;
  • Configuration of the source and the predictable emission;
  • Selection of the period to consider or real time mode;
  • Configuration of the map used ad background of the view.
Read more
WIND WATCHER

WIND WATCHER

WIND WATCHER

Support module for operating decisions according to wind conditions

Wind Watcher records and menages wind speed and wind direction data coming from many sensors of one site. It instantly processes data and identifies activities or alerts status to readily report potentially dangerous wind conditions for the operations of the site. WindWatcher can help taking decisions about operating conditions of the site, like safety, warning or alarmi status. It is commonly used in port terminals, railways, cableways, construction sites, off-shore platforms, etc. where it is necessary to manage activities according to wind conditions.

Wind Watcher receives real time values every second from the connected wind sensor (through one or more data logger) via radio, WiFi or Ethernet. it processes data and detected alerts, which are sent to the PC clients of the network to be viewed by the surveillance staff.

Ir is possible to view the past wind conditions which determined a specific operating situation in any moment.

Code: DSA501

Highlights

  • Fast acquisition and management of real-time values (one data per second) of the wind from one or more system anemometers;
  • The system is designed for the management of redundant measuring points;
  • Data visualization on PC or web platform;
  • Alarm generation by area (grouping function of different anemometers);
  • Memorization of every single moment for subsequent analysis and checks;
  • The system can be installed on two servers (redundancy);
  • Wind Watcher Alarm module for sending email notifications when set thresholds are exceeded.

Configuration

  • Wind Watcher processes realtime values as running mean values over a preset time rate and compares them through nearer sensors to find possible differences. it can keep the highest value for a conservative logic, excluding broken sensors or late measurements.
  • Alerts are divided into 4 levels. Each level produces alarm signals depending on the different thresholds and various wind conditions (windblast, ma x value over a period).

Alarms

Wind Watcher displays and warns about current alarm status for every sensor, pair of sensors (redundant), group or surgroup of sensors.

View of realtime status

Wind Watcher displays the wind condition for all measurement spots on a dynamic dashboard available on every PC client of the network.

Continuity of service

Wind Watcher can be set up on two servers, one main operating server and one side service server. Server features allows to keep updated the configuration inside the service server, to make them ready to be activated at any time in case of main server failure.

Read more
Towers

Towers

Towers and telescopic towers

These towers are used where meteorological sensors should be mounted ten meters from the ground. All models are equipped with accessories for fixing to the ground or to a concrete plinth.

Read more
Lightning rods

Lightning rods

Lightning rods

Lightning rod can be mounted on the top of Ø 50 mm masts or by means of the DYA058 lateral bar, on the lateral side of them. It is better to mount lightning rod on higher and separate masts than on the one where the equipment is installed. The system is made by the following units:

DYA091 Lightning rod
DYA094 Copper cable 50 mm, L=10 m
DYA098 Discharger peg, L=1,5 m

Optionally it is possible to mount the lightning rod on the same tower together with other equipment.
In this case the lightning rod should be mounted on a later bar:

DYA058 Bar for lateral installation of the DYA091 to Ø 50 mm masts

Highlights

  • Used to safely discharge to the ground the lightning strikes reaching the structure where the meteorological equipment is mounted
  • Complete assembling kit: lightning rod, copper cable and discharger peg
  • Installation on top or lateral side of the Ø 50 mm poles
Read more
Masts

Masts

H 2÷3 meter masts for sensors and data logger installation

These masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.

All masts are equipped with grounding electric protection. When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods.

When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.

H 2÷3 meter masts for sensors and data logger installation

These masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.

All masts are equipped with grounding electric protection. When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods.

When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.

Accessories

Basements for masts Ø 50 mm

  • DYA020 – Tripod for masts Ø 50 mm concrete plinth installation
  • DYA020.1 – Set of N.3 anchoring bolts, Ø 12mm for fixing tripods DYA020 on cement plinth
  • DYA021 – Tripod for masts Ø 50 mm ground installation

Picchetti per basi fissate a terreno

  • DYA023 – Set of n. 3 pickets for DYA021

Foldable system for masts Ø 50 mm

  • DYA019 – Joint (it should be used with tie-rods set)

Collar for jointing two masts

  • DYA002 – collar for jointing two masts Ø 50 mm (it should be used with tie-rods set)

Arm for masts installation on wall

  • DYA004 – Arm for mast Ø 50 mm wall installation (it should be used with tie-rod set)

Tie-ros set for mast Ø 50 mm

  • DYA028 – Set of 3 tie-rods and collar for fixing H 2-3 m pole
  • DYA026 – Sets of N.3 pickets for tie-rod fixing on the ground

Read more
Differential pressure

Differential pressure

Piezoresistive Sensors for Differential Pressure Measurement

These differential pressure sensors are designed for use with air and other non-corrosive, non-ionic gases. They function by measuring the pressure in two distinct environments using a pair of silicone tubes, and then directly providing the difference between these two readings.

These sensors can be effectively employed alongside Pitot tubes to determine air velocity. Notably, LSI LASTEM sensors possess the capability to directly compute air velocity from the differential pressure data.

 

Read more
Temperature and oxygen

Temperature and oxygen

Designed and manufactured for continuous measurements in extremely severe situations

A broad selection of sensors is available for monitoring compost heaps throughout the bio-oxidation process. These sensors are exceptionally durable, having been specifically designed for continuous operation within corrosive materials.

 

Read more
Surface temperature, asphalt state and aqueous film

Surface temperature, asphalt state and aqueous film

Series of sensors for monitoring the condition of the asphalt

Different versions of the same sensor are made to measure also the underground temperature using separate sensor units. DQA356 has RS485 output with an open protocol suitable for connection and Boschung data loggers as well as third part integration systems.

DQA356 sensor is made by Boschung Mecatronic AG.

Highlights

This sensor accurately reports the following parameters:

  • Road surface temperature;
  • Road conditions;
  • Water film thickness on the pavement.
Read more
Surface temperature, asphalt state and aqueous film

Surface temperature, asphalt state and aqueous film

Sensors for Asphalt Condition Monitoring

Various iterations of this sensor are produced to also gauge underground temperature, utilizing separate sensor units.

The DQA356 model features an RS485 output with an open protocol, making it suitable for connection to LSI LASTEM and Boschung data loggers, as well as other third-party integration systems.

The DQA356 sensor is manufactured by Boschung Mecatronic AG.

 

Read more
Surface freezing temperature of the asphalt

Surface freezing temperature of the asphalt

Sensor for Highly Accurate Freezing Temperature Measurement This sensor precisely measures the freezing temperature of asphalt. It is an active sensor that operates by cooling a dedicated sensor cell (Peltier cell) to a temperature below that of the road surface, thereby performing its measurements. Models: DQA354 Code: DQA354
Read more
Water level radar sensors

Water level radar sensors

For Continuous Non-Contact Measurements

Radar water level sensors enable continuous, non-contact level measurement of liquids. These sensors emit a series of extremely short microwave pulses towards the water surface, which are then reflected and received by the sensor's receiving system. The time it takes for the signal to return is directly proportional to the distance between the sensor and the water surface.

These models are often more advantageous than submersible types, particularly when installation is complicated by strong currents, potential overflows, or inaccessible water basin edges.

 

Read more
Submersible sensors for the water level

Submersible sensors for the water level

Piezoelectric for Continuous Measurements

Piezometric submersible sensors for water level are engineered for continuous level measurement in aquatic applications.

The sensor features a stainless steel housing and a flush ceramic diaphragm, which effectively prevents the accumulation of solids over time and facilitates easy cleaning.

The piezoelectric element registers the pressure differential between its submerged location and the atmospheric pressure at the surface. This pressure difference is directly proportional to the water level above the sensor.

A specialized (ventilated) cable links the sensor's sensing element to the surface.

 

Read more
Water conductivity, temperature and level

Water conductivity, temperature and level

Corrosion-Resistant Titanium Sensors

These are exceptionally robust sensors designed for measuring water conductivity, temperature, and level. The LSI LASTEM product line offers sensors utilizing piezometric, radar, and four-electrode technologies, all integrated within durable titanium housings.

With its robust, built-in four-electrode titanium technology and a shatterproof body, this sensor is ideal for demanding applications, including sewage treatment plants and landfill leachate monitoring.

 

Read more
Snow level sensor

Snow level sensor

Sensor for measuring the height of the snowpack

The robust design of DQL011.1 makes it the ideal solution for reliable measurement of snow-depth in extreme conditions.The additional air-temperature detection feature guarantees precise readings over a wide temperature range. The powerful ultrasonic impulses emitted by this sensor deliver reliable readings even when there is a difficult reflection ratio, as is the case with powdery or fresh snow. The sensor is characterized by a high level of operating reliability, low energy consumption and ease of use in the field.

Snow level sensor Highlights

  • Ultra-sonic technology with wide range temperature compensation;
  • Snow Distance/Deepth and Air temperature measurements;
  • Present weather information: Snow intensity, snowing starting time (RS-485);
  • Analogue (4-20 mA) and digital (RS-485 Modbus) outputs;
  • Air temperature compensation;
  • Low power consumption.

 

Data Sheets


HS9000-27

Manuals


MANUAL_DQL011.1-01

Read more
Wet temperature

Wet temperature

Thermometer probe with wet bulb and natural ventilation. ISO7726 standard. The Pt100 element is closed inside a wet cotton sock from a water tank. The water tank has a high reflection factor to avoid water temperature increase due to radiant sources. This sensor is needed for WBGT (ISO77243) heat stress index assessment.

Naturally ventilated humid temperature sensor

Wet temperature sensor (Tnw) Highlights

  • Wet temperature measurement with natural ventilation as required for the calculation of the WBGT index (ISO7243) in fixed and/or outdoor installation;
  • Disegnaed as described in the ISO7726 standard for the “wet bulb temperature”;
  • 1/2 litre water tank for more than 30 days water autonomy;
  • Well protected by the solar radiation;
  • In-house ISO17025 calibration laboratory;
  • Accessories for 4-20mA and RS485 output.

 

Data Sheets


HS9000-03

Manuals


MANUAL_DMA122-DMA122.1

Read more
Multiparameter Data Logger Radio Sensors

Multiparameter Data Logger Radio Sensors

Optimized for Museum Environments

These sensors are ideal for indoor measurements, featuring radio communication (868 MHz) that offers excellent capability to penetrate barriers, including perimeter walls.

 

Read more
Multiparameter Radio Sensors

Multiparameter Radio Sensors

Design and features suitable for museum applications

Wireless sensors for ambient air temperature, relative humidity, contact temperature and lux measurements depending on
the models, with radio communication (869,450 MHz) to data logger.

Three sensor versions are available, two of which are equipped with two additional inputs for cable connection to external sensors:

EXP811.2 (2 temperature sensors);

EXP813.2 (N.1 temperature sensor, N.1 lux meter sensor).

Thermohygrometer (radio)

Highlights

  • Radio sensor for measurement of: temperature, RH%, contact temperature and lux depending on the models;
  • Version with air temperature and RH% (EXP812.1);
  • Versions with additional sensors connected by cable: 2 contact temperature sensors (EXP811.2); a contact temperature sensor and a lux sensor (EXP813.2);
  • Replaceable integrated T and RH sensor;
  • Design and features suitable for museum applications;
  • Long radio range distance (600m);
  • The radio frequency of 868 MHz allows the signal to pass through even thick barriers such as perimeter walls;
  • Long battery life: 2 years;
  • Connection to data logger by means of the EXP301 radio receiver.

 

Data Sheets


HS9001-13

 

 

Read more
VOCs sensors

VOCs sensors

Volatile organic compounds

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

VOCs sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_GAS VOC-01

 

 

Read more
CO2 sensors

CO2 sensors

Carbon dioxide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

CO2 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_DSO205A-01

Read more
NH3 sensors

NH3 sensors

Ammonia

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

NH3 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_GAS VOC-01

Read more
NO sensors

NO sensors

Nitrogen monoxide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

NO sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series)

 

Data Sheets


HS9001-12

Manuals


MANUAL_GAS VOC-01

Read more
O3 sensors

O3 sensors

Ozone

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

O3 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_DSO146A-01

Read more
O2 sensors

O2 sensors

Oxygen

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

O2 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_GAS VOC-01

Read more
H2S sensors

H2S sensors

Hydrogen sulfide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

H2S sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_DSO120A-01

Read more
CO sensors

CO sensors

Carbon monoxide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

CO sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_DSO102A-01

Read more
NO2 sensors

NO2 sensors

Nitrogen dioxide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

NO2 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring
  • Portable and stand-alone applications in indoor environments.
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2.
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MANUAL_DSO109A-01

Read more
SO2 sensors

SO2 sensors

Sulfur dioxide

Range of sensors for measuring gas concentration in indoor environments. The line includes sensors with cables and mini-DIN connectors, to be used with data loggers type M-Log (ELO009) and R-Log (ELR510.1) and sensors with 4-20 mA output that can be used by third party systems or data logger with inputs terminal block. The sensors are based on electrochemical cell technology. Only the CO2 sensors are based on infra-red cell technology and the VOCs sensors on the PID cell technology.

SO2 sensors Highlights

  • Wide range of sensors optimized for indoor air quality monitoring;
  • Portable and stand-alone applications in indoor environments;
  • Possibility to calibrate the sensor using “zero” and “span” trimmers. Not for CO2;
  • 4-20 mA output, free wires cable L.10 m (DSOxxx se-ries). mV output and cable with MiniDIN connector type (ESOxxx series).

 

Data Sheets


HS9001-12

Manuals


MW9001-12

Read more
Heat flow meter

Heat flow meter

Sensor for measuring the thermal flow of the walls or the ground.

 

 

Read more
Illuminance

Illuminance

Illuminance Measurement with Luxmetric Sensors

This luxmeter probe is designed to gauge illuminance in indoor settings, specifically calibrated to the response curve of the human eye (Vlamba CIE curve).

Various models are offered, providing different measuring ranges, making them suitable for both indoor and outdoor applications.

 

Read more
Air pressure

Air pressure

Piezoresistive sensors for measuring differential pressure

Differential pressure sensors for air and for non-corrosive and non-ionic gases. This sensor measures the pressure in two distinct environments using two silicone tubes and directly provides the difference of the two measurements.

They can be used together with Pitot tubes to measure air velocity. sensors can directly calculate the air velocity from the differential pressure measurement.

Differential pressure Highlights

  • Piezometric differential pressure sensors;
  • Measurement of the pressure in the two environ-ments using the included silicon tubes. The sensor directly provides the difference of the two values;
  • Typical sector in which differential pressure sensor is applied is HVAC: verification of filters in the pipes, measurement of air flow in ventilation systems, testing of over-pressure environments;
  • Suitable for measuring the air speed when connected to Pitot tubes. When used with data log-gers, air speed values are directly calculated in m/s. Air flow and Air changes are also provided;
  • ISO17025 accreditated internal laboratory for air speed measurements with Pitot tubes.

 

Data Sheets


HS9009-03

 

Read more
Thermoigrometer

Thermoigrometer

Dry bulb temperature sensor

Air temperature and RH% sensor with Pt100 output for temperature and 0-1 Vdc output for RH%.It is precise and reliable sensor, suitable for a continuous measurement even in severe environments, in presence of deep thermal and hygrometric ranges.

Thermoigrometer Highlights

  • Small dimensions and outstanding performances allow this sensor to be used in a wide range of environmental applications;
  • Measurement of both air temperature and Relative Humidity;
  • Fast retourn after saturation;
  • Standard dust filter to ensure good protection against pollutants.

 

Data Sheets


HS9001-07

 

Read more
Wet Bulb Temperature

Wet Bulb Temperature

Naturally Ventilated Wet Bulb Temperature Monitoring

We offer an extensive array of indoor monitoring sensors, designed for compatibility with their proprietary data acquisition units as well as external data management platforms. This sensor selection encompasses options for both portable and permanently installed applications.

 

Naturally ventilated wet bulb temperature sensor

This thermometric probe features a wet bulb and utilizes natural ventilation, adhering to the ISO7726 standard. The Pt100 element is encased within a moist cotton sock, which draws water from a reservoir. This water tank is engineered with a high reflection factor to prevent any temperature increase in the water caused by radiant heat sources. This sensor is essential for measuring the WBGT (ISO7243) heat stress index.

Read more
Water and solid temperature

Water and solid temperature

A Pt100 sensor (1/3 DIN Class A) for precisely gauging the temperature within liquids or various materials. These sensors are hermetically sealed and constructed from AISI304 stainless steel.

 

Read more
Floor surface and air temperature

Floor surface and air temperature

Assessing Localized Comfort

A sensor designed for measuring the floor surface temperature and the air temperature at a height of 10 cm from the floor.

 

Read more
Surface temperature 

Surface temperature 

Plate sensor for temperature measurements in contact with surfaces. The compact size allows it to be installed even in small spaces.

 

Read more
Air temperature

Air temperature

Versatile Sensors for Diverse Applications

These Pt100 air temperature sensors are designed for indoor environments and, when combined with a radiant screen, become ideal for outdoor meteorology.

 

Read more
M-Log

M-Log

The Compact and Adaptable Data Logger

M-Log represents a series of compact data loggers tailored for environmental monitoring, particularly well-suited for portable indoor applications. These units are characterized by their small size and flexibility, yet they deliver robust performance and reliability.

Typically, the M-Log (ELO009) is deployed on a portable tripod for conducting thermal environmental measurements. Its uses span assessing thermal comfort and stress, evaluating air quality, performing ventilation measurements, and conducting thermo-hygrometric assessments for building energy efficiency and HVAC testing.

Read more
E-Log

E-Log

Data Logger for Meteorological Applications

The E-Log was specifically conceived for environmental uses. It features dedicated inputs for a diverse array of sensors and is capable of performing calculations for various derived quantities.

E-Log meticulously records data from its connected sensors and supports multiple communication protocols for both input and output.

Robust and dependable, the E-Log facilitates measurements even in the harshest environments. Its 16-bit A/D converter guarantees precise and trustworthy data for standard meteorological, hydrological, and air quality applications—and, more broadly, for any environmental monitoring need.

 

Read more
Alpha- Log

Alpha- Log

The Most Capable Data Logger from the LSI LASTEM Lineup Alpha-Log represents the newest advancement in the LSI LASTEM data logger product range. Alpha-Log is the most recent addition to the LSI LASTEM data logger family. Model: DLALB0100 Code: DLALB0100
Read more
Visibility

Visibility

Sensors for Visibility and Present Weather Measurement

A diverse array of visibility sensors is offered, specifically designed for monitoring conditions on roads and within tunnels.

Models are available with an expansive measuring range to detect fog and haze. Options include both digital and analog outputs, as well as relays for activating external equipment. These are designed for integration into intelligent transport systems, enabling automatic switching of warning signals as visibility conditions change.

Read more
Evaporation

Evaporation

System for Measuring Evaporation

The evaporimeter pan and its accompanying plastic platform are constructed to adhere to WMO standards for class “A” evaporimeters.

The pan itself is fabricated from stainless steel and includes a stainless steel still well, designed to hold the evaporimeter level sensor. This sensor comprises a piezometric water level sensor with an analog output, facilitating simple connection to any data acquisition system.

Data loggers possess the capability to manage the switching of a solenoid valve for the automatic replenishment of water (when the measured level drops below 25 cm).

The platform is crafted from white plastic to minimize the effect of heat accumulation.

Models: Class A system according to W.M.O.

Code: DYI010

Read more
Soil moisture and temperature sensor

Soil moisture and temperature sensor

Sensors for Temperature and Volumetric Water Content Measurement

This series comprises sensors specifically engineered for measurements within soils or other porous materials.

These sensors utilize TDR (Time Domain Reflectometry) technology.

 

Read more
Particulate concentration sensor

Particulate concentration sensor

Optical technology for continuous measurements

The fine dust sensors are optical sensors for continuous measurement and control of fine dust contents, three particulate sizes are available: simultaneous PM10 and PM2.5, and separate PM 2.5 and PM10. The determination of the dust content is based on the method of scattered light measurement. The sucked air is tempered. The flow enforcement takes place via the integrated fan (2 l/min). In the device there is a periodic control and correction of zero point and reference point which is enabled by the electrostatic precipitator with integrated high voltage module. A high zero-point stability is achieved by evaluation of the internal measuring signals.

Particulate concentration sensor

Highlights

  • Simultaneous or separate determination of PM10 and PM2.5
  • Monitoring of fine dust in:
    • Production area (workshops, factories, etc.)
    • Indoor air quality monitoring in offices
    • Monitoring the ambient air
    • Integration in weather station
  • Automatic zero setting
  • 2 l/min fan
  • 4÷20 mA output
  • RS485 Modbus-RTU output
  • Wide operative environmental conditions: -20÷50 °C, 0-95 %

 

Data Sheets


HS9000-28

Manuals


MANUAL_PRPMA3100

Read more
Wetness presence

Wetness presence

Sensor for the presence and persistence of water on the leaf surfaces

The leaf wet presence sensors detect the presence of water over the leaf surface irrespective of the source. Sensors is based on the principle of conductivity between electrodes, which are arranged on the double sensitive surface.

Wetness presence Highlights

  • Measures the presence of wetting, however generated in a range of 0-100%;
  • Given its small size and weight, applicable on the leaf surface, or usable as a simulation of the behaviour of the leaf;
  • Measure the presence of wetting independently on its two faces; two independent outputs.

 

Data Sheets


HS9000-20

Manuals


MANUAL_DQA057.1-01

Read more
Rain presence

Rain presence

Sensor for measuring the presence of precipitation

Rain presence sensors are used when it is necessary to discriminate between rainfall and condensation. The measurement principle employed is that of conductivity between two electrodes; these are kept above environmental temperature by heaters in order to prevent condensation.

Rain presence Highlights

  • Heated sensor for avoiding valse measurement due to dew;
  • Relay contact when rain starts;
  • Direct connection to pole 45÷65 mm diameter.

 

Data Sheets


HS9000-19

Read more
Storm front distance

Storm front distance

For the measurement of electrical emissions into the atmosphere

Detection of the storm front distance (not lightning strike intensity) within an area of in 5÷40 km range. Utilizing a sensitive RF receiver and integrated proprietary algorithm, all models detect the electrical emissions from lightning activity and then provide for an estimation of the distance to the head of the storm from 40 km away, while rejecting disturbances from manmade signals such as motors and microwave ovens. The estimated distance which is detected idoes not represent the distance to the single lightning but the estimated distance to the leading edge of the storm.

Storm front distance Highlights

  • The sensor measures distance between itself and storm front;
  • Reading of electromagnetic emission from the lightning sparks (typically at 400 KHz);
  • It detects electrical emissions from lightning activity and then provides an estimation of the distance to the head of the storm, from 40 km away down to 5 km.;
  • It detects cloud flashes to ground and intra-cloud (cloud to cloud) activities.

 

Data Sheets


HS9000-21

Manuals


MANUAL_DQA60x

Read more
Atmospheric pressure

Atmospheric pressure

High-Quality Barometers for Meteorological Use

These sensors are engineered for the precise measurement of atmospheric pressure.

The DQA240.1 model is particularly well-suited for LSI-LASTEM data acquisition systems (offering a 0-1Vdc output).

The DQA801 is also adaptable for integration into third-party systems (with 0/4-20 mA output), and its measurement range is locally adjustable via a trimmer. The DQA251 stands as a high-precision instrument for absolute pressure, QNH, QFE, and QFF.

Its long-term stability and integrated web interface make it an ideal instrument for professional acquisition systems, meteorology, and aviation applications. Encased in a heavy-duty IP67 enclosure, it permits straightforward installation even in demanding environmental conditions. This sensor is constructed in accordance with WMO and ICAO standards.

 

Read more
Luxmeter

Luxmeter

Broad Measurement Capability

This sensor is designed for measurements within the PAR (Photosynthetic Active Radiation) spectral range.

Luxmeter probes are also available to assess illuminance in long-term outdoor applications, calibrated to the human eye's response curve (Vlamba CIE curve).

 

Models

  • Luxmeter 0÷150 KLux - ESR003A.1

  • A luxmeter probe for measuring illuminance in long-term outdoor applications.

Code: ESR003A.1

Read more
UV-A and UV-B radiometers

UV-A and UV-B radiometers

Broadband spectral response

Radiometer with broad spectral response for measuring of atmospheric irradiance in the UV-A and UV-B spectrum. The sensing element is a photodiode with optical filter with interferential deposition in order to improve spectral transmission. A High-quality dome and diffuser improves cosine response for radiations coming from lower angles.

UV-A and UV-B radiometers Highlights

  • Good answer to the UV-A and UV-B band curves;
  • Calibration made under the sun for a better response to sunshine and athospheric conditions;
  • Traciability to ARPA Ivrea (Italy) laboratory (ISO17025);
  • Very good cosine response;
  • Broadband spectral response;
  • Thin film metal interference filter technology and specially developed silicon photodiode according to WMO requirements;
  • Analogue output: 4÷20 mA and 10÷30 Vac/dc power supply.

 

Data Sheets


HS9000-14

 

Read more
Net solar radiation

Net solar radiation

High sensitivity thermopile technology

This sensor is designed for measuring net solar radiation. It quantifies the difference between the incoming radiation from the sun and atmosphere versus the components that are reflected (shortwave) and re-emitted (longwave) from the ground surface.

 

Read more
Calibrated Cell

Calibrated Cell

To evaluate the performance of photovoltaic panels

This reference cell is specifically engineered for use in solar energy systems, providing precise measurements of insolation within the spectral range relevant to photovoltaic panels. Its design accounts for the unique spectral response of PV modules, ensuring accurate data for performance analysis. This allows for a direct comparison between the actual output of a PV system and its potential under ideal conditions, crucial for optimizing energy generation and identifying any performance degradations over time.

 

Read more
Global Solar radiation

Global Solar radiation

Global solar radiation

Sensors for measuring global irradiation

Radiometers designed for measurement according to ISO 9060 and WMO No. 8 (Part I, Chapter 7). These sensors are classified as an ISO9060 Secondary Standard. With a total daily uncertainty of only 2%, fast response times, these sensors are ideal for users requiring high-level accuracy and reliability.

Global solar radiation

Highlights

  • Spectrally flat Class A pyranometers (Secondary Standard);
  • Compliant with EC 61724-1: 2017;
  • RVH technology: Recirculating Ventilation and Heating (DPA953);
  • Measurement of the angle of inclination (DPA953);
  • Calibration traceable to WRR;
  • Outputs: irradiance in W/m², sensor body temperature, inclination angle, humidity and pressure inside the sensor;
  • Ideal sensor for monitoring the performance of solar panels and meteorological networks.

Global solar radiation Highlights

  • Spectrally flat Class A pyranometers (Secondary Standard);
  • Compliant with EC 61724-1: 2017;
  • RVH technology: Recirculating Ventilation and Heating (DPA953);
  • Measurement of the angle of inclination (DPA953);
  • Calibration traceable to WRR;
  • Outputs: irradiance in W/m², sensor body temperature, inclination angle, humidity and pressure inside the sensor;
  • Ideal sensor for monitoring the performance of solar panels and meteorological networks.

 

Data Sheets


HS9000-11

Manuals

MANUAL_DPA953.1-01

MANUAL_DPA252

Read more
ALL IN ONE compact

ALL IN ONE compact

Up to Six Parameters from a Single Sensor Body

These sensors integrate a unique folded-path sonic anemometer with a multi-element temperature sensor, a fast-response capacitive relative humidity sensor, and a state-of-the-art barometric pressure sensor. Alternative configurations are available with either a photodiode radiation sensor or an optical rain sensor. The outcome is a professional-grade All-In-One Weather Sensor engineered for reliability, extended lifespan, and straightforward installation.

These compact all-in-one sensors are especially suitable for industrial and environmental applications, including smart building monitoring, environmental control of power grids, coastal area surveillance, and smart city initiatives.

Small all-in-one sensors for any environment.

 

Read more
Standard 3-cup anemometer (Wind Speed Sensor)

Standard 3-cup anemometer (Wind Speed Sensor)

Sensors designed for measurement in any environmental condition

A diverse range of sensors featuring moving parts is available, suitable even for extreme conditions. These sensors can be connected to LSI LASTEM data loggers or integrated into third-party systems.

 

Read more
Wind direction – Compact type

Wind direction – Compact type

Sensors designed for measurement in any environmental condition

High mechanical resistance sensors
A diverse selection of wind direction sensors is offered, featuring both moving and ultrasonic components, designed to operate even in extreme conditions. These sensors are suitable for integration with LSI LASTEM data loggers or for use within third-party systems.

Read more
Combined ultrasonic

Combined ultrasonic

Sensors with no moving parts

Ultrasonic Anemometers represent the perfect sensors for general meteorological applications that require no moving components for reduced maintenance, or for measurements demanding a fast response, even in very low-range wind speed conditions.

Model DNB205 (serial output) is a compact sensor highly suitable for lightweight weather stations.

DNB305-305.1 (serial output) are constructed from aluminum and exhibit excellent performance.

DNB306-306.1 models feature 4-20 mA outputs. The DNB105.1 model is designed for a high-speed range of up to 85 m/s and comes with a 4-20 mA output.

 

Read more
Combined cups and vane

Combined cups and vane

Combined wind speed and wind direction sensors.

This range of sensors incorporates, within a single device, transducers for both wind speed and wind direction measurements.

Its implementation simplifies installation needs, besides being more compact, lighter, and more cost-effective than the typical two-sensor kit.

Despite this, the accuracy and thresholds are largely comparable to those offered by alternative two-sensor cup and vane kits. Various data output signals are available.

 

 

Read more
Rainfall

Rainfall

Rain gauges suitable for every need

A broad selection of sensors is available to measure both the quantity and intensity of precipitation. Our rain gauges consist of a precipitation collection funnel that directs water into a double-tank receiver linked to a magnet. This magnet then activates a reed relay, which generates a pulse that can be recorded by an external counter.

 

Read more
Air Temperature and Relative Humidity (Analogue, digital, radio outputs)

Air Temperature and Relative Humidity (Analogue, digital, radio outputs)

Thermohygrometers for any type of environmental application

A comprehensive selection of precise and dependable sensors is available, engineered for continuous meteorological measurements, even in challenging climatic conditions and where significant thermal and hygrometric variations occur. These units utilize the RTD Pt100 1/3 DIN B (Class AA EN60751) principle for temperature measurement and capacitive technology for humidity.

This thermohygrometer is specifically designed for harsh climatic weather conditions and includes an anti-radiation screen.

 

Read more
Surface temperature

Surface temperature

Sensors for measuring the surface temperature even in severe environments

Plate-made sensor for surface temperature measurements. Its compact dimensions facilitate installation even in small spaces. It can be easily fixed using sylicon, adhesive band or thermoconductive paste.

Surface contact temperature Hightlights

  • Robust sensor for outdoor application even in severe environmental conditions;
  • 4 wires Pt100 technology for long distance cable connections;
  • Ideal for PV module surface temperature measurements;
  • Pt100 1/3 DIN B Class AA sensitive element for outstanding accuracy (0.15°C);
  • Flat cable for cabling in narrow path;
  • Accessories for 4-20 mA and RS485 signal output;
  • Internal ISO17025 accreditated calibration laboratory
Read more